SECTION 8 " Programming
8-48 VT220/ANSI Terminal Emulation Programmer’s Reference Guide
Private Sequences
Private sequences enable or disable the autosend
(Table 8-33).
Table 8-33
Private Sequence
Mode Sequence* Wireless Station Action
Set ESC [ = 3 l Enables autosend. Transmits the screen
when the last field is filled. If you are on
the last defined field and get data from
the bar code reader or RS-232 port, the
display will also be automatically sent
even if the field not filled.
Reset ESC [ = 3 h Disables autosend. Only transmits when
a terminating key is pressed.
* The last character of the set mode sequence is lowercase L
(6C hexadecimal).
Proprietary Sequences
Line Edit and Character Modes
Two proprietary escape sequences enable the host to put the
wireless station into line edit (block) mode or character
mode (Table 8-34). Note that the wireless station enters
character mode when it is cold-started.
To Next Page
Loading...