SECTION 2 " RT3210 Radio Terminal
2-4 VT220/ANSI Terminal Emulation Programmer’s Reference Guide
Locked Mode
If locked mode is selected through the firmware menus, the
view window is locked to the upper left-hand corner of the
display. The screen does not window around, and only the
area that has been selected to be the screen size is visible.
Locked mode disables the windowing keys, or only allows
you to window around the physical display size selected
through the firmware menus.
Display Annunciators
The bottom line of the radio terminal’s display is reserved
for annunciators that show the radio terminal’s current sta-
tus or operation in progress. The following annunciators
can appear.
The radio terminal is transmitting information
to the base station.
The radio terminal is receiving information
from the base station. This annunciator appears
only when the information is for the radio termi-
nal’s unique address number.
Radio terminal’s keyboard is in function mode.
The key you press on the keyboard with [FUNC]
returns the function or programmable function
key code assigned by the programmer, or does
an operation. Key codes and operations are lo-
cated just above the keys and to the left (black
lettering).
Communications loss. No communication
with the host computer has occurred for at least
60 seconds. The radio terminal may be out of
radio range, the base station may not have pow-
er, or communications from the host computer to
the base station may not be properly set up.
To Next Page
Loading...