SECTION 8 " Programming
8-58 VT220/ANSI Terminal Emulation Programmer’s Reference Guide
Table 8-38
Cursor Control Key and Codes Generated
Wireless Station
Key
Cursor Key Mode
Reset (Normal)
Cursor Key Mode
Set (Application)
Up arrow CSI A SS3 A
Down arrow CSI B SS3 B
Right arrow CSI C SS3 C
Left arrow CSI D SS3 D
Sending Host Cursor Keys
In keyboard unshifted and shifted modes, the cursor control
key sends a host cursor key to the host computer. The cur-
sor control key emulates the arrow keys of a VT220 termi-
nal in either their normal arrow key mode or application
mode, depending on the state set by the programmer. See
“Keyboard Codes” discussed later in this section.
To Send to Host Press Wireless Station Key(s)
Host cursor right key
["]
Host cursor left key
[A ]
Host cursor up key
[Y]
Host cursor down key
[B]
Host cursor right key
[SFT]+["]
Host cursor left key
[SFT]+[A]
Host cursor up key
[SFT]+[Y]
Host cursor down key
[SFT]+[B]
To Next Page
Loading...