SECTION 8 " Programming
8-62 VT220/ANSI Terminal Emulation Programmer’s Reference Guide
Local Editing Setup
To use the wireless station in local edit mode, the local edit-
ing features must be set up for the application software as
described in Table 8-42.
Table 8-42
Local Editing Setup
Feature Setting Description
Edit mode Edit Edited text is stored in memory until
you press a terminating key, which
sends the text to the host.
Edit key execution mode Not supported.
Transmit execution mode Immediate The wireless station sends data to the
host immediately after you press a ter-
minating key.
Local editing application
keys
Suffix
transmit
When you press [F1] through [F20],
the wireless station sends that func-
tion to the host after sending a block
of data.
Line transmit mode Disabled The wireless station sends a full page
of data to the host after you press a
terminating key.
Transfer termination mode Enabled After you press a terminating key, the
wireless station sends the scrolling re-
gion, which is the area inside the
scrolling margins.
VT131 transfer mode Not supported.
Space compression Disabled The wireless station sends a space
character for each unused character
position.
End of line characters On the wireless station, no characters
indicate the end of a line in a data
block.
End of block characters On the wireless station, no characters
indicate the end of a data block.
To Next Page
Loading...