SECTION 4 " RT1700 Radio Terminal
VT220/ANSI Terminal Emulation Programmer’s Reference Guide 4-15
Editing Keypad
The VT220 terminal’s editing keypad has editing keys and
cursor control (arrow) keys. Editing keys have functions
assigned to them by the application software in use. Refer
to your application’s software manual for the uses of the
editing keypad keys. The cursor control keys in black shift
or gold shift mode allow you to scroll through the radio ter-
minal’s local display memory.
Editing Keys
Table 4-3 describes how to do VT220 terminal editing opera-
tions on the 57-key and 37-key keyboards.
Table 4-3
RT1700 Editing Keys
To Do Editing Operation Press
Find [GOLD]+[4]
Insert here [GOLD]+[5]
Remove [GOLD]+[6]
Select [GOLD]+[1]
Prev screen [GOLD]+[2]
Next screen [GOLD]+[3]
Cursor Control Keys
The following chart describes how to do VT220 terminal
cursor control operations on the 57-key and 37-key key-
boards.
To Next Page
Loading...