SECTION 5 " RT5900 Radio Terminal
5-14 VT220/ANSI Terminal Emulation Programmer’s Reference Guide
To Move Display Press
One space right
[BROWN]+["]
One space left
[BROWN]+[A]
One line up
[BROWN]+[Y]
One line down
[BROWN]+[B]
Eight spaces right
[GOLD]+["]
Eight spaces left
[GOLD]+[A]
Eight lines up
[GOLD]+[Y]
Eight lines down
[GOLD]+[B]
Auxiliary Keypad
The VT220 terminal’s auxiliary keypad consists of numeric
keys (which enter numeric data) and programmable func-
tion (PF) keys. The PF keys have operations assigned to
them by the application software in use. Refer to your ap-
plication’s software manual for the uses of the PF keys.
Table 5-4 describes how to use the radio terminal to do
VT220 terminal auxiliary keypad operations.
Table 5-4
RT5900 Auxiliary Keypad
For Auxiliary Operation Press
0--9 [KEYPD]+[0] -- [KEYPD]+[9]
-- (hyphen) [KEYPD]+[--]
, (comma) [KEYPD]+[M]
. (period) [KEYPD]+[.]
Enter [KEYPD]+[ENTER]
PF1--PF4 [F1] -- [F4]
To Next Page
Loading...