SECTION 7 " PEN*KEY 6500 Computer
VT220/ANSI Terminal Emulation Programmer’s Reference Guide 7-13
To Move Press
One position right [Blue]+
One position left [Blue]+
One position up
[Blue]+
One position down
[Blue]+
Eight positions right [Gold]+
Eight positions left [Gold]+
Eight positions up
[Gold]+
Eight positions down
[Gold]+
Auxiliary Keypad
The VT220 terminal’s auxiliary keypad consists of numeric
keys (which enter numeric data) and programmable func-
tion (PF) keys. The PF keys have operations assigned to
them by the application software in use. Refer to your ap-
plication’s software manual for the uses of the PF keys.
Table 7-4 describes how to use the PEN*KEY computer to
do VT220 terminal auxiliary keypad operations.
Table 7-4
PEN*KEY 6500 Auxiliary Keypad
For Auxiliary Operation Press
0--9 [Gold]+[PF2]+[0] --
[Gold]+[PF2]+[9]
-- (hyphen) [Gold]+[PF2]+[--]
, (comma) [Gold]+[PF2]+[M]
. (period) [Gold]+[PF2]+[.]
Enter [Gold]+[PF2]+[ENTER]
PF1--PF4 [PF1] -- [PF4]
To Next Page
Loading...