Intermec VT220/ANSI - Section 5 RT5900 Radio Terminal

VT220/ANSI Terminal Emulation Programmer’s Reference Guide 5-1
Section 5
RT5900 Radio Terminal
" " " " " " " " " " " " " " " " " " " " " " " " " " " "
VT220/ANSI Display Emulation
The RT5900 Mobile Mount Radio Terminal’s display shows
radio terminal and VT220 prompts, and information you
type. Because the VT220 terminal’s screen is 80 columns
by 24 lines, the radio terminal represents a part of the in-
formation on the larger VT220 screen.
"
NOTE: RT5900 Series radio terminals have UHF, 900 MHz, or 2.4 GHz
radios.
Host View Size
The host view size is 24 characters high by 80 characters
wide.
Screen Size
You can select the number of display lines and characters
per line. The options are 40, 60, or 80 characters per line
by 8, 10, 12, 16, 21, or 25 lines. The default is 12 lines and
40 characters. To change the screen size, open the firmware
and then select the following options in this order: LCD
PARMS, SCREEN SIZE.