Intermec VT220/ANSI - Table 4-4 RT1700 Auxiliary Keypad; Top-Row Function Keys

SECTION 4 " RT1700 Radio Terminal
4-18 VT220/ANSI Terminal Emulation Programmer’s Reference Guide
Table 4-4 describes how to use the radio terminal to do
VT220 terminal auxiliary keypad operations.
Table 4-4
RT1700 Auxiliary Keypad
For Auxiliary
Operation
57-Key Keyboard 37-Key Keyboard
0--9 [KEYPAD]+[0] --
[KEYPAD]+[9]
[KEYPAD]+[0] --
[KEYPAD]+[9]
-- (hyphen) [KEYPAD]+[GOLD]+[B] [KEYPAD]+[GOLD]+[F2]
, (comma) [KEYPAD]+[GOLD]+[M] [KEYPAD]+[,]
. (period) [KEYPAD]+[BLACK]+[U] [KEYPAD]+[.]
Enter [KEYPAD]+[ENTER] [KEYPAD]+[ENTER]
PF1--PF4 [PF1] -- [PF4] [F1] -- [F4]
Top-Row Function Keys
On the VT220 terminal’s keyboard, function keys [F1]
through [F5] are used for hold screen, print screen, set-up,
data/talk, and break. The radio terminal supports only the
break function, which is [F5] on the radio terminal’s key-
board. Table 4-5 shows how to perform function operations.
Function keys [F6] through [F20] are user-defined keys
(UDKs) that have operations assigned to them by the ap-
plication software in use. Refer to your application’s soft-
ware manual for their uses.