SECTION 3 " RT1100 Radio Terminal
VT220/ANSI Terminal Emulation Programmer’s Reference Guide 3-11
To change from delete mode to backspace mode, open the
firmware by pressing [GOLD]+[BLACK]. Then select the
following options in this order: SET-UP PARMS (password:
CR52401), PROTOCOL OPTS, VT220, DEL TO BS.
Table 3-2
RT1100 Special Function Keys
To Do Operation Press
Delete
[BLACK]+[¬]
Backspace
[¬]
Tab [GOLD]+[9]
Return [ENTER]
Ctrl [GOLD]+[8]
Lock (sets and clears shift lock) [BLACK]+[GOLD]
Shift (uppercase characters) [GOLD]+[7]
Space bar [SP]
Compose character Not supported
Editing Keypad
The VT220 terminal’s editing keypad has editing keys and
cursor control (arrow) keys. Editing keys have functions
assigned to them by the application software in use. Refer
to your application’s software manual for the uses of the
editing keypad keys. The cursor control keys in black shift
or gold shift mode allow you to scroll through the radio ter-
minal’s local display memory.
Editing Keys
Table 3-3 describes how to use the radio terminal to do
VT220 terminal editing operations.
To Next Page
Loading...