SECTION 6 " PEN*KEY 6400 Computer
VT220/ANSI Terminal Emulation Programmer’s Reference Guide 6-21
Table 6-7
PEN*KEY 6400 Top-Row Function Keys,
51-Key Keyboard
To Do Function
Press
F5--F20
[BLUE]+[E] -- [BLUE]+[T]
41-Key Keyboard
When alpha lock mode is engaged on the 41-key keyboard,
it switches the function keys with the alphabetic keys.
That is, function keys normally in the primary plane ([F1]
through [F12]) move to the [BLUE] plane. Function keys
normally in the [SHFT] plane ([F13] through [F20]) move to
the [SHFT]+[BLUE] plane.
Table 6-8 describes how to do function operations when the
41-key keyboard is in standard mode or alpha lock mode.
To engage alpha lock mode press [BLUE]+[GOLD]. Then
press the correct key combinations in the table. The key-
board stays in alpha lock mode until you press [BLUE]+
[GOLD] again to unlock it.
Table 6-8
PEN*KEY 6400 Top-Row Function Keys,
41-Key Keyboard
To Do Function
Standard Mode Alpha Lock Mode
F5--F12 [F5] -- [F12] [BLUE]+[F5] --
[BLUE]+[F12]
F13--F20 [SHFT]+[F1] --
[SHFT]+[F8]
[SHFT]+[BLUE]+[F1] --
[SHFT]+[BLUE]+[F8]
To Next Page
Loading...