Intermec VT220/ANSI - Select Character Attributes (DECSCA); Line Attributes

SECTION 8 " Programming
VT220/ANSI Terminal Emulation Programmer’s Reference Guide 8-27
Select Character Attributes
(DECSCA)
The wireless station ignores select character attributes
(Table 8-16).
Table 8-16
Select Character Attributes
Character Attribute
Sequence
and Ps
Wireless Station
Action
All attributes off
CSI 0 I q
Ignores this code.
Designate characters as
non-erasable by DECSEL/
DECSED
CSI 1 I q
Ignores this code.
Designate character as eras-
able by DECSEL/DECSED
CSI 2 I q
Ignores this code.
Line Attributes
Line attributes affect an entire display line. The cursor se-
lects the line affected by the attribute. It stays in the same
character position when the attribute changes, unless the
attribute would move the cursor past the right margin. In
this case, the cursor stops at the right margin. When scrol-
ling, the attribute moves with the line.