SECTION 6 " PEN*KEY 6400 Computer
6-10 VT220/ANSI Terminal Emulation Programmer’s Reference Guide
Following are the keys and their descriptions.
Key(s) Description
[SCAN] The scan key enables an integrated scanner to
be operated after this key is pressed.
[ENT] The two enter keys send CR, CR LF, or SS3 M,
depending on PEN*KEY computer mode set-
tings.
[.] Types a period.
[--] Types a hyphen.
[0] -- [9] Send numbers 0 through 9 or SS3 p through
SS3 y, depending on how the keypad mode is set.
[¬]
Sends a backspace or a delete key, depending on
how the firmware is set up.
[SHFT] Places the keyboard into green shift mode.
[F1] -- [F12] Do operations defined by the application.
[SP] Types one space.
I/O
Suspends and resumes operation.
Six unlabeled keys are in the bottom two rows of the 41-key
keyboard. Following are their functions when they are in
the primary plane:
" The white key with “CTRL” printed above it is the con-
trol key ([CTRL]) which, in combination with other
keys, does control functions.
" The white key with “%” printed above it is the percent
key ([%]), which types a percent sign.
" The white key with “$” printed above it is the dollar
key ([$]), which types a dollar sign.
" The white key with “:” printed above it is the colon key
([:]), which types a colon.
" The blue key ([BLUE]) places the keyboard into blue
shift mode.
" The gold key ([GOLD]) places the keyboard into gold
shift mode.
To Next Page
Loading...