SECTION 8 " Programming
VT220/ANSI Terminal Emulation Programmer’s Reference Guide 8-33
Table 8-23 (Continued)
Erasing
Name
(Mnemonic) Wireless Station ActionSequence
Erase in display
(ED)
CSI J Erases from cursor to the end of display, including
the cursor position. Line attribute is single-height,
single-width for all completely erased lines.
If erasure mode (ERM) is set, ED cannot erase pro-
tected character positions.
CSI 0 J Same as CSI J.
CSI 1 J Erases from the beginning of the display to the
cursor, including the cursor position. Line attrib-
ute becomes single-height, single-width for all com-
pletely erased lines.
CSI 2 J Erases complete display. All lines are erased and
changed to single-width. The cursor does not
move.
Selective erase
in line
(DECSEL)
CSI ? K
CSI ? 0 K
CSI ? 1 K
CSI ? 2 K
Ignores these codes.
Selective erase
in display
(DECSED)
CSI ? J
CSI ? 0 J
CSI ? 1 J
CSI ? 2 J
Ignores these codes.
To Next Page
Loading...