SECTION 8 " Programming
8-60 VT220/ANSI Terminal Emulation Programmer’s Reference Guide
Top-Row Function Keys
Function keys [F1] through [F4] on the wireless station’s
keyboard have been assigned the VT220 [PF1] through
[PF4] definitions. On the VT220 terminal’s keyboard, func-
tion keys [F1] through [F5] are used for hold screen, print
screen, set-up, data/talk, and break. The wireless station
supports only the break function, which is [F5] on the wire-
less station’s keyboard.
Wireless stations emulate the remaining VT220 terminal
top-row function keys ([F6] through [F20]), which have
functions assigned to them by the application software in
use. Refer to your VT220 application software manual for
the uses of these keys. Table 8-40 lists function keys.
Table 8-40
Top-Row Function Keys and Codes Generated
VT220 Key Code
F5 None
F6 CSI 1 7 ~
F7 CSI 1 8 ~
F8 CSI 1 9 ~
F9 CSI 2 0 ~
F10 CSI 2 1 ~
F11 CSI 2 3 ~
F12 CSI 2 4 ~
F13 CSI 2 5 ~
F14 CSI 2 6 ~
F15 CSI 2 8 ~
F16 CSI 2 9 ~
F17 CSI 3 1 ~
F18 CSI 3 2 ~
F19 CSI 3 3 ~
F20 CSI 3 4 ~
To Next Page
Loading...