SECTION 9 " Extended Commands
VT220/ANSI Terminal Emulation Programmer’s Reference Guide 9-23
Table 9-4 (Continued)
Set Parameters Characters
Line 1, Columns 2--36
Column DescriptionCharacter *
12
(Space)
0
1
Remote display for RT3210.
No change from current setting.
Not attached.
Attached.
13--15
(Spaces)
000--255
Beeper volume.
No change from current setting.
Volume range in increments of 5. The larger the num-
ber, the louder the volume.
16--18
(Spaces)
000--030
Beeper frequency.
No change from current setting.
Frequency range. The larger the number, the higher
the frequency.
19--21
(Spaces)
001--010
Beeper length.
No change from current setting.
Duration in seconds. The larger the number, the longer
the beep and the slower the keyboard response time.
22
(Space)
1
0
Delete key mapping.
No change from current setting.
Delete key is backspace (08 hexadecimal).
Delete key is delete (7F hexadecimal).
* Some wireless stations do not support some characters. Refer to the wireless
station’s user guide for supported characters and options.
To Next Page
Loading...