SECTION 3 " RT1100 Radio Terminal
VT220/ANSI Terminal Emulation Programmer’s Reference Guide 3-5
Y
The radio terminal’s keyboard is in shift mode. The
letter key you press while the keyboard is in this mode
sends letters in uppercase.
Keyboard action mode (KAM) has been set. The
radio terminal ignores all keystrokes that send char-
acters to the host. This state stays on until KAM has
been reset.
X
The radio terminal is in control mode. The key you
press while the terminal is in this mode sends a con-
trol character.
Laser scanner is in use. This annunciator ensures
you are aware of the laser scanner and the cautions
you must exercise. Read and obey the caution labels
on your laser scanner so that you do not injure your
eyes.
S
C
A
N
K
The radio terminal is in keypad mode.
C
The radio terminal is in character mode. The radio
terminal sends, to the host computer, each key as it is
pressed.
B
The radio terminal is in line edit (block) mode. The
radio terminal is sending, to the host computer, cumu-
lative data when you press a terminating key.
e
The radio terminal is in local edit mode, which is a
feature of the VT330/VT340 terminal.
The battery needs to be recharged. When this an-
nunciator appears, you will not be able to operate your
radio terminal until you place it on a charger.
+
--
The battery is charging.
C
To Next Page
Loading...