INVT GD300L Series

Goodrive300-LIFT series inverter Keypad operation procedure
-33-
The units place is
blinking.
All digits are
blinking.
The units place is blinking.
The units place
is blinking.
Note: When setting the value, you can press and + to modify the value.
The units place is
blinking.
The units place
is blinking.
PRG
ESC
PRG
ESC
PRG
ESC
PRG
ESC
DATA
ENT
DATA
ENT
DATA
ENT
Figure 5-4 Sketch map of password setting
5.4.3 How to watch the inverter state through function codes
Goodrive300L series inverters special for lifts provide group P17 as the state inspection group. You
can enter P17 directly to view the state.
The units place is
blinking.
All digits are
blinking.
The units place is blinking.
The units place
is blinking.
Note: When setting the value, you can press and + to modify the value.
The units place is
blinking.
The units place is
blinking.
DATA
ENT
DATA
ENT
DATA
ENT
PRG
ESC
PRG
ESC
PRG
ESC
PRG
ESC
Figure 5-5 Sketch map of state viewing