Iskra FPC 200 - Page 54

Functionality
54 USER MANUAL FPC 200 - 3/2017
2.5.3.6 Setting parameters
Parameter
Range
Description
Enabled
No
Yes
Enabling protection function.
Alarm temperature
-35 … 220 °C
Temperature limit that triggers alarm signal
Trip temperature
-35 … 220 °C
Temperature limit that triggers trip signal
Pickup block
None
Variable 1
Variable 2
Variable 3
Variable 4
Source of blocking signal.
Table 40 Temperature monitoring parameters selection.
2.5.3.7 Counters
Name
Description
Alarm
Total consecutive number of alarm signals presented for each
sensor separately.
Trip
Consecutive number of trip signals presented for each sensor
separately.
RTD fault
Fault counter of any active probe.
Table 41: Counters presented in temperature monitoring function.