Iskra FPC 200 - Page 73

Functionality
USER MANUAL FPC 200 - 3/2017 73
2.6.4.5 Setting parameters
Parameter
Range
Description
Service factor
0,50 … 1,15 … 4,00 I
n
Service factor of rotating machine.
Stall current
0,50 … 4,00 … 10,00 I
n
Current limit above which stall of the rotating machine is considered.
Table 68 Machine control function parameters.
2.6.4.6 Counters
Name
Description
Running hours
Number of running hours of a rotating machine.
Running minutes
Number of running minutes of one hour of a rotating machine.
Table 69 Counters presented in machine control function.