ITEM C 3-Series User Manual

Electrical installation
Page 106
8.13 SD/MMC card
8.13.1 Supported card types
 SD
 SDHC
 MMC
8.13.2 Supported functions
 Loading of a parameter set (DCO file)
 Saving of the current parameter set (DCO file)
 Loading of a firmware file
8.13.3 Supported file systems
 FAT12
 FAT16
 FAT32
8.13.4 File names
Only file and directory names in accordance with the 8.3 standard are supported.
8.3 file and directory names have a maximum of eight characters (letters or numbers) followed by a full
stop/period (".") and an extension with a maximum of three characters.
In addition, only upper-case letters and numbers are permissible in the file and directory names.

ITEM C 3-Series Specifications

General

Brand	ITEM
Model	C 3-Series
Category	Controller
Language	English