ITEM C 3-Series User Manual

Function overview
Page 52
5 Function overview
5.1 Motors
5.1.1 Synchronous servomotors
In a typical application, permanent-magnet synchronous machines with a sinusoidal EMF are used. The item Servo Positioning
Controller C 3-Series is a universal servo drive controller that can be operated with standard servomotors. The motor
specifications are determined and parameterised by an automatic motor identification system.
5.1.2 Linear motors
In addition to rotary applications, item Servo Positioning Controller C 3-Series are also suitable for linear drives. In this case,
too, permanent-magnet synchronous linear motors are supported.
Due to the high signal processing quality, the item C 3-Series is particularly suitable for driving air-core and iron-core
synchronous motors with a low motor inductance (2 … 4 mH).

ITEM C 3-Series Specifications

General

Brand	ITEM
Model	C 3-Series
Category	Controller
Language	English