ITEM C 3-Series User Manual

Product description
Page 34
3.4.2 USB interface [X19]
This interface was also mainly intended as a parameterisation interface, but it can also be used for controlling the item servo
positioning controller C Series.
3.4.3 UDP interface [X18]
The UDP communication enables the connection of the item servo positioning controller C Series to the Ethernet fieldbus
system. The communication via the UDP interface [X18] is realised by way of standard cabling.
3.4.4 CAN interface [X4]
The CANopen protocol as per DS301 with the DSP402 application profile is implemented.

ITEM C 3-Series Specifications

General

Brand	ITEM
Model	C 3-Series
Category	Controller
Language	English