ITEM C 3-Series - 8.3 Connector: power supply [X9]; 8.3.1 Configuration on the device [X9]; 8.3.2 Mating connector [X9]

Electrical installation
Page 77
8.3 Connector: power supply [X9]
The item Servo Positioning Controller C 3-Series receives its 24 VDC power supply for the electronic control system via
connector [X9].
The mains power supply is a three-phase system. As an alternative to AC power supply or for the purpose of DC bus circuit
linking, a direct DC supply for the DC bus circuit is possible.
8.3.1 Configuration on the device [X9]
 PHOENIX Power-COMBICON PC 4/11-G-7.62 BK
8.3.2 Mating connector [X9]
 PHOENIX Power-COMBICON PC5/11-ST1-7,62 BK