Safety notes for electrical drives and controllers
Page 28
2.4.7 Protection during the handling and installation of the devices
Improper handling and installation of certain parts and components may cause injuries under adverse conditions.
Risk of injury due to improper handling!
Risk of personal injury caused by crushing, shearing, cutting, or impacts!
The following general safety instructions apply:
Comply with the general set-up and safety regulations concerning the handling and installation of the devices.
Use suitable installation and transport devices.
Prevent trapping and crushing by suitable protective measures.
Use suitable tools only. If specified, use special tools.
Use the lifting devices and tools in a proper manner.
If necessary, use suitable protective equipment (e.g. safety goggles, protective footwear, protective gloves).
Stay out from under suspended loads.
Immediately remove any liquid spills on the floor in order to prevent slipping.
To Next Page
Loading...
Need help?
General
