General
Page 15
1 General
1.1 Documentation
The purpose of this product manual is to ensure the safe use of the item Servo Positioning Controller C 3-Series. It contains
safety notes, which must be complied with.
Further information can be found in the following manuals of the item C Series product range:
Product Manual "item servo positioning controller C 1-Series": Description of the technical data and device functionality
plus notes concerning the installation and operation of
C 1-02, C 1-05, and C 1-08.
Product Manual "FSM 2.0 - STO": Description of the technical data and device functionality plus notes on the
installation and operation of the FSM 2.0 – STO.
PROFIBUS Manual "item Servo Positioning Controller C Series": Description of the implemented PROFIBUS-DP
protocol.
CANopen Manual "item Servo Positioning Controller C Series": Description of the implemented CANopen protocol as
per DSP402.
EtherCAT Manual "item Servo Positioning Controller C Series": Description of the implemented EtherCAT protocol
(CoE) (German version).
You can find all of these documents on our homepage for download (http://www.item24.com).
Certificates and declarations of conformity for the products described in this manual can be found at http://www.item24.com.
The entire software functionality of the new item C Serie will be implemented in the course of a step-by-step development
process.
This version of the product manual contains the functions of the firmware version 4.1.7001.1.1.
To Next Page
Loading...