ITEM C 3-Series User Manual

Product description
Page 31
 Freely programmable I/Os.
 User-friendly parameterisation with the item Motion Soft
®
software.
 Menu-guided start-up.
 Automatic motor identification.
 Easy connection to a superordinate control system, e.g. to a PLC via the I/O level or fieldbus.
 High-resolution 16-bit analogue input.
 Technology slots for extensions, e.g. an I/O extension module or Profibus interface.
Note: Depending on the current consumption, only one technology module with an additional fieldbus interface may be
used.
 "STO" option (Safe Torque Off, corresponds to EN 60204 Stop 0), SIL 3 in accordance with ISO EN 61800-5-2 / PL e in
accordance with ISO EN 13849.

ITEM C 3-Series Specifications

General

Brand	ITEM
Model	C 3-Series
Category	Controller
Language	English