Chapter 6
Controller V6 Touch
Page 114 DM55 DynaDrum PP V6, Manual No.21-18, Rev.2.19
V6 Extended I/O Module PN 117648
The V6-XIO Module provides additional inputs and outputs that can be configured for
applications that need more I/Os than the Base Module supplies.
Optional Printed Circuit Boards
Electrical schematics and other details on the following optional PCBs can be found on
the main ASU schematic in Chapter 13:
• Adhesive Level Sensor (drum low level detection)
• Stack Light (system status lights)
• Signal Isolator (gear pump auto mode)
• Trigger Switch Pump Enable (hand-held applicators/ swirl kits)
To Next Page
Loading...