Chapter 6
Controller V6 Touch
Page 94 DM55 DynaDrum PP V6, Manual No.21-18, Rev.2.19
Log Book Screen
To go to this screen, press the Log Book button on the Settings Screen.
The Log Book provides a read‐only history of the last 100 (maximum) controller faults and events.
If several systems are controlled by the HMI, all events will be listed here.
Item Description
1
The most recent event is recorded at the top of the Event List.
• Examples of events: System Status OFF, READY, RUNNING, STANDBY, NOT READY,
Recipe loaded.
• Examples of controller faults: RTD Fault, Temperature Alarm, Minimum Level, Drive
Failure, Parameter CRC Error, Over-temperature, Communication error.
See point "Faults, Alarms".
2
BACK Button
Press to return to the previous screen.
3
Scroll Buttons
Press the arrow buttons to scroll up and down through the Event List.
To Next Page
Loading...
