ITW Dynatec DM55 DynaDrum - Extended Pump Mode Settings Screen, Linear Line Speed, Pressure Control

ITW Dynatec
Chapter 6
Controller V6 Touch
Page 60 DM55 DynaDrum PP V6, Manual No.21-18, Rev.2.19
Extended Pump Mode Settings Screen, Linear Line Speed, Pressure Control
 To go to this screen, press the Settings button on the Pump Control screen.
 The Extended Pump Mode Settings screen allows you to select the Current Pump Mode and to
go to the Automatic Ramp Compensation (ARC) screen.
System 1 Pump 1 Example at DM55 with Gear Pump:
3
1
9
2
3
4
5
PUMP 2
6
7
8