ITW Dynatec DM55 DynaDrum - Ball Valve Purge Kit, PN 114757

Chapter 10
Options & Accessories
ITW Dynatec
DM55 DynaDrum PP V6, Manual No.21-18, Rev.2.19 Page 165
Ball Valve Purge Kit, PN 114757
Item No. Part Number Description Qty. per Unit
1
114758
Ball valve prg cyl mounting
1
2
114030
Washer, lock, M5
4
3
106243
Screw M5x50
4
4
114768
Ball valve, 3PC, SS, high temp
1
5 114767 Valve hdl for 3PC 1
6
114761
Pneumatic cylinder 25x50
1
7 114763 Rod eye pneumatic cylinder 1
8
812342
Screw M6x40
1
9
107390
Nut M6
2
10
115438
Fitting, el 1/4“TBX10-32
2
11
118392
Fitting, street elbow, 1/2“NPT
1
Note:
This kit must be used in conjunction with piston pump outlet manifolds 118279 or 118280 or for gear
pump outlet manifolds 114752 or 118258 only!