Chapter 3
Description and Technical Specs
DM55 DynaDrum PP V6, Manual No.21-18, Rev.2.19 Page 19
Chapter 3
Description and Technical Specs
3.1 Applicable Safety Regulations
Intended Use
The ITW Dynatec DM55 DynaDrum™ Bulk Adhesive Melter may be used only to melt
and convey suitable materials, e.g. adhesives. When in doubt, seek permission from ITW
Dynatec.
If the unit is not used in accordance with this regulation, a safe operation cannot be
guaranteed.
The operator - and not ITW Dynatec - is liable for all personal injury or property damages
resulting from unintended use!
Intended use includes, that you
• read this documentation,
• heed all given warnings and safety instructions, and
• do all maintenance within the given maintenance rates.
Any other use is considered to be unintended.
Unintended Use, Examples
The Bulk Melter may not be used under the following conditions:
• In defective condition.
• With electrical cabinet door open.
• In a potentially explosive atmosphere.
• With unsuitable operating/processing materials.
• When the values stated under Specifications are not complied with.
The Bulk Melter may not be used to process the following materials:
• Toxic, explosive and easily flammable materials.
• Erosive and corrosive materials
• Food products.
Do not use the platen
• As a press.
• To lift loads.
• To heat objects.
To Next Page
Loading...