ITW Dynatec DM55 DynaDrum - Frame and Panel Box Assemblies

ITW Dynatec
Chapter 9
Drawings and Bill of Materials
Page 142 DM55 DynaDrum PP V6, Manual No.21-18, Rev.2.19
Frame and Panel Box Assemblies
Item No. Part Number Description Qty. per Unit
1 114006 Drip pan 1
2 114126 Clamshell assy. 1
3 114367 Vent hood 1
4 114468 Hose support 2
5 115957 Screw M16x40 24
6 115287 Half clamshell 1
7 115935 Crossbar 1
8 115947 Cylinder 2
9 115950 Screw M24x260 2
10 115951 Washer M24 2
11 115952 Washer M24 2
12 115938 Drip tray 2
13 115962 Hoop bracket 1
14 115958 Washer M16 12
15 116039 Screw M16x25 4
16 115936 Pedestal 1
17 823191 Controller assy. DM55, V6, 480V Piston Pump 1
823189 Controller assy. DM55, V6, 240V Piston Pump 1
823190 Controller assy. DM55, V6, 400V Piston Pump 1
823171 Controller assy. DM55, V6, 480V Gear Pump 1
823169 Controller assy. DM55, V6, 240V Gear Pump 1
823170 Controller assy. DM55, V6, 400V Gear Pump 1
18 817184 XFMR, 5KVA, 480/240V, 3PH enclosed 1
19 115945 Junction box 1
20 115941 Mounting cable track 1
21 114453 Stacklight 3pos. 24VDC 1
22 116040 Bracket, stabilizer 2
23 114440 Cable track assy. 1
24 116153 Dashboard 1
25 048J088 Conduit fitting 3/4” 1
26 048J016 Conduit 3/4” seal-tite 2
27 115934 Base plate 1
28 048J071 Conduit fitting 3/4”X90D 1