ITW Dynatec DM55 DynaDrum - Zone On;Off Switch on the Numeric Entry Keypad

Chapter 6
Controller V6 Touch
ITW Dynatec
DM55 DynaDrum PP V6, Manual No.21-18, Rev.2.19 Page 55
Zone On/Off Switch on the Numeric Entry Keypad
Item Description
1
Zone On/Off Switch
• Zones can be activated/ deactivated temporarily. Some zones (e.g. Platen) cannot be
deactivated.
• The switch is colored light green if ON and light red if OFF.
2
By pressing the OK button the entered values will be confirmed and stored in the controller.
The numeric entry keypad closes and you will return to the previous screen.
3
By pressing the ESC button any entered but not yet confirmed values will be discarded and
you will return to the previous screen.
1
2
3