ITW Dynatec DM55 DynaDrum - Page 96

ITW Dynatec
Chapter 6
Controller V6 Touch
Page 96 DM55 DynaDrum PP V6, Manual No.21-18, Rev.2.19
Item Description
1
Section Access
Press the buttons to select access to each parameter as follows:
• Unlock = the parameter may be changed by all users.
• Operator = the parameter may be changed by Operator personnel only, by using an
Operator password.
• Maintenance = the parameter may be changed by Maintenance personnel only, by using a
Maintenance password.
2 Press the OK button to confirm your entered values and return to the previous screen.
3 Press the ESC button to discard any non-confirmed values and return to the previous screen.
4
Change Maintenance Password Button
Touch the Change Password button and a numeric entry keypad will appear. Enter desired
numeric password (at least one digit). Press OK to confirm.
5
Change Operator Password Button
Touch the Change Password button and a numeric entry keypad will appear. Enter desired
numeric password (at least one digit). Press OK to confirm.
1
2
3
4
5