Engineering manual - UniSAB III 1.10.8
168/346
001930 en 2021.06
Service
5.1.3 Drive
This menu shows the accumulated energy consumption of the compressor.
Note: The Service/Maintenance/Drive menu will only be visible if Drive Com is set to LS or DA, see sub-
section 6.4.1 Drive - 7: Drive Com for further information.
For the Danfoss drive, in this example with a SABflex compressor, the energy consumption is displayed
as:
Energy 1 xxx kWh
For the Leroy Somer drive, in this example with a SABCube compressor, the energy consumption is
shown as:
Energy 1 xxx kWh
Energy 2 yyy MWh
Find the picture in the menu Service/Maintenance/Drive.
To Next Page
Loading...
