Johnson Controls SABROE UniSAB III - Transfer (Reciprocating Compressors); Take over (Reciprocating Compressors)

Engineering manual - UniSAB III 1.10.8
236/346
001930 en 2021.06
Set-up
6.5.8 Transfer (reciprocating compressors)
In the Multisab system, which regulates and optimises more than one compressor, there is a number of
factors attached to a Transfer/Take-over function between reciprocating and screw compressors. These
factors are described in detail in the UniSAB III sequence manual.
6.5.9 Take over (reciprocating compressors)
In the Multisab system, which regulates and optimises more than one compressor, there is a number of
factors attached to a Transfer/Take-over function between reciprocating and screw compressors. These
factors are described in detail in the UniSAB III sequence manual.