Engineering manual - UniSAB III 1.10.8
294/346
001930 en 2021.06
UniSAB III (boot) and communication set-up
8.8 U Set configuration tool
8.8.1 U Set configuration software for setup of UniSAB III
The new UniSAB III configuration software U Set has been developed as a tool to make it easier to con-
figure UniSAB III in the field and to manage and keep track of the UniSAB III setup.
The U Set software can be downloaded from the Sabroe site: www.sabroe.com. Check that the U Set
version number corresponds to the UniSAB III software version. The version number is part of the U Set
file name, e.g. U Set 1.09.0(#21).xls means that this is U Set corresponds to UniSAB III software version
1.0.9.0, with U Set sub revision number #21.
To start the U Set program (Excel), click the Enable Macros button to activate the U Set functions.
Excel 2007: Office button/Excel options/Trust Center/Trust Center settings/Macro Settings>Enable all macros (OR Disable all
macros WITH notification) (Restart Excel).
Excel 2003: Tools/Macro/Security/Security Level <= Medium (Restart Excel)
Handle and change settings
When the U Set program is running, it is possible to import and modify an already existing configuration
or setup file and then export it. First you may want to change the language. In the language drop down
menu in the top of U Set you can choose any one of the UniSAB III languages. The top menu and the
help function will remain in English.
The following files can be imported and exported:
• Configuration.xml - this file contains the UniSAB III configuration and calibration values
• AnalogInput.xml - this file contains shutdown/alarm limits and set points
• PIDSettings.xml - this file contains PID regulator parameters, like Ti, Td and Ts
• Timers.xml - this file contains the UniSAB III timers setting
• EmailService.xml - this file contains the UniSAB III e-mail set up
To Next Page
Loading...
Need help?
General
