Johnson Controls SABROE UniSAB III User Manual

Engineering manual - UniSAB III 1.10.8
001930 en 2021.06
231/346
Set-up
6.5.4 Date-time
This picture shows the time in hours, minutes and seconds and
the date as Day, Month and Year.
Date and time must be set correctly in order for the shutdowns to be stored with the correct time. This
function has a battery back-up.
6.5.5 Oil charging (screw compressor)
Provided that the compressor is fitted with an oil charging pump the pump can be started in the picture
Oil charging:
To start the pump, proceed as follows:
Place the cursor on Run timer. Set the time that the pump is going to run and place the cursor on Start
oil pump. Change No to Yes and confirm by pressing .
The pump will now start and run for the set period. If the pump should stop before time expiry, select No
in the third line. The pump will now stop and run timer drop to 0.

Johnson Controls SABROE UniSAB III Specifications

General

Brand	Johnson Controls
Model	SABROE UniSAB III
Category	Control Systems
Language	English