Engineering manual - UniSAB III 1.10.8
254/346
001930 en 2021.06
Set-up
In Remote idle time you can define the idle time for the remote connection. With the shown set-up the
connection will be disconnected after 15 minutes without activity on the line.
In Remote Connect you can switch between Local which enables you to connect to a UniSim software
simulator at IP address 127.0.0.1, or to establish a Remote TCP/IP connection to another UniSAB III in
order to remotely supervise and control this UniSAB III.
6.6.4 User interface
See subsection 1.2.5 Session, User interface.
To Next Page
Loading...
