Name: Johnson Controls SABROE UniSAB III
Brand: Johnson Controls
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Engineering manual - UniSAB III 1.10.8

288/346

001930 en 2021.06

UniSAB III (boot) and communication set-up

8.5.4 Configuration of Profibus/DP

See subsection 6.4.6 Communication for the software set-up of the Profibus/DP port in UniSAB III.

First you must enable Profibus communication by setting Profibus to Yes. Next, define the Profibus

Node No. between 1 and 254 and the protocol type or GSD file no. you want to run. GSD file 095D is the

extended protocol and 08AA is the tiny protocol. The communication speed Profi baud rate will be set up

automatically when UniSAB III is connected to another Profibus/DP device.

For more information see the UniSAB Profibus DP protocol manual.

Questions and Answers:

Need help?

Do you have a question about the Johnson Controls SABROE UniSAB III and is the answer not in the manual?

Johnson Controls SABROE UniSAB III Specifications

General