Engineering manual - UniSAB III 1.10.8
282/346
001930 en 2021.06
UniSAB III (boot) and communication set-up
If the communication load on the Intranet/LAN, which UniSAB III is directly connected to, is very high,
the user interface may become very slow or in more extreme cases, UniSAB III may restart. If this hap-
pens, you can lower the impact of the high communication load on UniSAB III by changing the parame-
ter LAN load high from No to Yes. See also subsection 5.2.2 Software, Misc functions.
To Next Page
Loading...
