Johnson Controls SABROE UniSAB III User Manual

Engineering manual - UniSAB III 1.10.8
32/346
001930 en 2021.06
UniSAB III control
Switch between the password levels with the and keys. When you have selected the appropriate
level with the key, you must enter in this case the four digit Superuser password using the arrow
keys.
When you have entered the four digits, press and /OK.
If the password is accepted, you are now back in the Suction pressure limits picture and may change
the Low shutdown limit with the and keys.
When you have set the limit value, press to store the value in the memory. Before pressing you
have the possibility to undo the parameter change by pressing instead of . By doing so, the
changes you have just made will not be stored in the memory.
F3

Johnson Controls SABROE UniSAB III Specifications

General

Brand	Johnson Controls
Model	SABROE UniSAB III
Category	Control Systems
Language	English