Johnson Controls SABROE UniSAB III User Manual

Engineering manual - UniSAB III 1.10.8
001930 en 2021.06
323/346
Troubleshooting
Version no. Description
1.0.8.0
For screw compressors SAB 120-355 an oil pump error was shown with the shutdown
text “Oil pump error No.2” which has now been changed to “Oil pump error” in order to
have consistency between screw types.
The key can be used to step back in the five most recent menu pictures. It has been
observed that with supervisor password open this could fail and end up in a loop be-
tween only two pictures - even if the last picture opened was a picture different from
these two. This has now been corrected.
In the History shutdown log some missing Digital Input and Digital Output parameters
have been added.

Johnson Controls SABROE UniSAB III Specifications

General

Brand	Johnson Controls
Model	SABROE UniSAB III
Category	Control Systems
Language	English