Johnson Controls SABROE UniSAB III User Manual

Engineering manual - UniSAB III 1.10.8
34/346
001930 en 2021.06
UniSAB III control
UniSAB III automatically skips back to the Manage Favourites picture. In this picture, place the cursor
on the user picture you want to insert the value into, e.g. the User 1 favourite. Press /CONFIRM to in-
sert the actual setpoint into User 1.
Press /OK to continue bookmarking. Repeat this operation up to seven times, i.e. until the User 1 pic-
ture is full as shown below.
You can change the order of the parameters by using the arrow keys to move parameters up and down
in the User pictures. Place the cursor on the value you want to move and press . This will highlight the
arrows on the right side of the value which may now be moved up or down with and . When satisfied,
press and move the cursor to the next value you want to move.
When satisfied with the order in the User pictures, press /DONE in the Manage Favourites picture to
terminate.
F3
F3
F2

Johnson Controls SABROE UniSAB III Specifications

General

Brand	Johnson Controls
Model	SABROE UniSAB III
Category	Control Systems
Language	English