Engineering manual - UniSAB III 1.10.8
001930 en 2021.06
5/346
Whenever the emergency stop is activated during operation, the alarm text Compr. motor error will ap-
pear in the display. Before the compressor can be restarted, deactivate the alarm by means of the
/RESET key and release the emergency stop.
Note: If UniSAB III is set at Remote or Auto, the compressor will restart automatically.
Technical data
Power supply
Nominal VAC
Hz
85-250 47-63
Consumption
32 VA
Main supply terminals
2.5 mm
2
rated cross section
Ambient temperature
0-55°C (during operation)
Humidity
10-90% relative humidity (not condensing)
Tightness IP 54
To Next Page
Loading...
