Johnson Controls SABROE UniSAB III User Manual

Engineering manual - UniSAB III 1.10.8
68/346
001930 en 2021.06
Alarms and shutdowns
Shutdown/alarm Id
Danbuss
Profibus/
Modbus
Low-low oil pressure
shutdown NA 104
High liquid level
alarm NA 105
High suction pressure gradient
alarm + shutdown NA 111
1) May occur as alarm in MAN and AUTO.
2) Shutdown at prelubrication. Alarm during operation.
3) HPO/HPC/HPX only.
4) The shutdown Low oil pump pressure during operation applies to SAB 80. The shutdown is only activated at a discharge pres-
sure level below 16 bar.
5) Shutdown relay can be deactivated.
NA = Not available
Table 18: Shutdowns and alarms with identification numbers for reciprocating compressors
For the optional protocols RS2LAN, Profibus DP and Modbus TCP you can also find the ID numbers in
the dedicated manuals.

Johnson Controls SABROE UniSAB III Specifications

General

Brand	Johnson Controls
Model	SABROE UniSAB III
Category	Control Systems
Language	English