4-58
5. If you don't wish to register the route in the route list, select "No" and press
.
Navigation will start without route registration.
If you wish to register the route in the route list, select "Yes" and press
. The route list
will be displayed.
Move the cursor to the number you wish to register, and press
. The route will be
registered in the route list, and navigation will start.
Please refer to "4.8.2 Moving the Cursor to an Unregistered Number" for more details.
The waypoints selected with the cursor will also be registered in the waypoint list. Registered
waypoint numbers will be displayed as waypoint symbols on the plot screen.
(6) Select from the waypoint list
A waypoint can be selected from the waypoint list.
1. Press
, , and then , and display the waypoint list.
2. Move the cursor to the waypoint number you wish to set as the waypoint, and press
to
start navigation.
For details regarding moving the cursor, please refer to "4.8.1 Moving the Cursor Within a
List".
(7) Select from the event / mark list
A waypoint can be selected from the event / mark list.
1. Press , , and then , and display the event / mark list.
2. Move the cursor to the number you wish to set as the waypoint, and press
to start
navigation.
Refer to "4.8.1 Moving the Cursor within a List" for details regarding cursor movement.
(8) Select a route from the route list
The GOTO key can be used to select and execute a route.
1. Press
, , and then , and display the route list.
2. Move the cursor to the number you wish to execute, and press
.
Refer to "4.8.1 Moving the Cursor within a List" for details regarding cursor movement.
3. The route start / end screen will be displayed, so perform route settings.
Please refer to "4.6.1 Selecting a Route from the Route List" for details regarding each
submenu and configuration methods.
4. Press
"NAVIGATION" to start navigation.
(9) Enter the waypoint number on the active route.
If a waypoint number on the active route is entered, navigation will restart from the
configured waypoint after discarding the route currently executed.
1. Press
and then .
2. Enter the waypoint number, and press
to start navigation.
To Next Page
Loading...
