4-75
(1) ARRIVAL/ANCHOR
3. Press
"ARRIVAL/ANCHOR".
4. Press to select "ARV", "ANC", or "OFF", and press
.
An alarm will sound when own ship enters or exits the arrival circle set for the course. If no
arrival circle is set, then an alarm will sound when own ship enters or exits the default course
value arrival circle radius.
Alarms cannot be set for both "ARRIVAL" and "ANCHOR".
(2) XTD/BOUNDARY
5. Press
"XTD/BOUNDARY".
6. Press to select "XTD", "BOUNDARY", or "OFF", and press .
If the ship leaves or enters the set route, the alarm will sound. If no route is set, then an
alarm will sound when the ship enters or exits the default route width.
Alarms cannot be set for both "XTD" and "BOUNDARY".
XTD Boundary
Waypoint Arrival Alarm
To Next Page
Loading...
