4-114
1. Refer to "4.20 Equipment Configuration" and display the equipment configuration menu.
2. Press
, then , and select "LAN".
(1) Data route sharing setting
3. Press
to select "DATA ROUTE", and press .
4. Press
to select "SHARE", and press .
Select "OFF" to disable sharing.
Data Route Selection Screen
(2) Active route sharing setting
3. Press
to select "ACTIVE ROUTE", and press .
4. Press
to select "SHARE1", "SHARE2", "SHARE3", or "SHARE4", and press
to display the connection destination screen.
Select "OFF" to disable sharing.
Connection Destination Screen
5. Press
"CONNECT", select the destination, and press .
Normally, "MULTICAST" should be selected for the destination.
To send to a specific unit, select "UNICAST".
6. When "UNICAST" is selected, press
and to select the destination IP "2.TO IP"
and "3.PORT No.".
Select "SHARE1",
"SHARE2",
"SHARE3", or
"SHARE4"
Sharing
Icon
Procedure
To Next Page
Loading...
